|
Key Specifications/Special Features:
The EZ-1200 is a floor standing style
winding machine, large sized to be easily placed in a factory or workshop,
equipped with head and bench in galvanised steel and covered in stainless
steel,
fixation plate, tailstock with security closure, guider system protection
and pedal.
The machine is governed by numeric control and CNC electronic programming.
This machine is specially designed for the manufacture of solenoids and
power and distribution transformers from 10 to 1.200 KVA, using aluminium or
copper wires, including rectangular or flat wires with a special guider.
The wide range of velocities, up to 500 r.p.m, permits primary and secondary
windings on the same machine, thus reducing the production processes.
The concept and design facilitates the placement of necessary accessories
such as end-fillers or insulation paper in foil, of various levels.
TECHNICAL CHARACTERISTICS.
-
Wire
...............................................................................
0.01 – 99 mm
-
Wire
Æ
(depends on bobbin size) ..................................
0.01 – 30 mm
-
Max. winding length
........................................................ 1.100 mm
-
Max. Distance between
points ......................................... 1.200 mm
-
Max. winding
.................................................................. 800
mm
-
Winding shaft speed
......................................................... 0 – 500 r.p.m
-
Guider precision
.............................................................. 0,01 mm
-
Main shaft motor
.............................................................. 7.5 HP
-
Guider motor
....................................................................
0,4HP (Brushless)
-
Power source
.................................................................... 3 x
380Vca - 50Hz
PROGRAMMING CHARACTERISTICS.
-
Max. No. of programmable
windings (Standard 50) ....... Max. 175
-
Max. No. of windings per coil
(Standard 20) .................. Max. 200
-
Type of programming
...................................................... CNC
|
