Application:

For winding self supporting coils using thermo-plastic coated wire. The wire is wound onto a former and the turns “bonded” together. The former is then removed and the finished coil ejected from the machine.

Products include:  RFID coils. laser heads, voice coils, magnet coils, sensor coils, vibrator coils and pancake motor coils.

Main features:

• Automatic clamp/cut system, layer winding, material unloading and cleaning of the tool during each cycle, dispensing oil release agent if required.

• Fine programmable pitch control enabling precise layer winding.

• LCD screen for easy setup, with options for PC link.

• Wire tensioner with magnetic braking provides constant tension.

• Synchronous drive tailstock ensures precise tool alignment and allows for smaller core ID’s.

• Temperature of the hot air system is freely programmable.

SKR-DQ A3    Is used predominantly for the production of single wire width card coils. It utilizes a two position wire guide, first position for winding, second for cut/clamping of the start and end.

Click for large photo.

*Note: To read our specification sheets you will need adobe acrobat, get it free here...