Application:

For winding self supporting coils using thermo-plastic coated wire. The wire is wound onto a former and the turns “bonded” together. The former is then removed and the finished coil ejected from the machine.

Products include:  RFID coils. laser heads, voice coils, magnet coils, sensor coils, vibrator coils and pancake motor coils.

Main features:

• Automatic clamp/cut system, layer winding, material unloading and cleaning of the tool during each cycle, dispensing oil release agent if required.

• Fine programmable pitch control enabling precise layer winding.

• LCD screen for easy setup, with options for PC link.

• Wire tensioner with magnetic braking provides constant tension.

• Synchronous drive tailstock ensures precise tool alignment and allows for smaller core ID’s.

• Temperature of the hot air system is freely programmable.

SKR-DQ C    Used in the manufacture of a wide range of air coils. This machine is similar to the SKR-DQ A1 but is fitted with a servo positioned tailstock. This allows very precise coil widths to be achieved and due to its rigidity is recommended when layer winding coils of over 6 layers.

If a number of coil types are required from one machine, then the programmable tailstock position allows a quicker tool changeover time.

Click for large photo.

*Note: To read our specification sheets you will need adobe acrobat, get it free here...